Amazing Solutions to Install a Luminaire On a Dicentric Ceiling Lamp

Five Solutions to Install a Luminaire On a Dicentric Ceiling Lamp

If a light is an essential element in the harmony of your interior, there are still many constraints: electrical outputs poorly arranged in a room, problems with fixing the ceiling, non-aesthetic connection. Depending on your interior, the choice of the luminaire will not be the same.
You dream of installing a sublime suspension in your room, but your son's exit is poorly placed? Do not give up; some solutions do not require significant work. Here are five intelligent solutions and deco to install your luminaire exactly where you want it!

Thanks to the deported lighting solutions, choosing your luminaire becomes easier. The light moves and redraws the space. Both practical and elegant, they allow you to reinvent your interior and create ambiances by just adjusting the orientation of the light points. Follow the Guide!

First Solution to Install a Luminaire On a Dicentric Ceiling Lamp : The hook

It is the most basic solution. The power supply is traditionally located in the center of the ceiling. However, if in the case of a figure where your table is placed at the corner of the room, the hook turns out to be the easiest solution.

The principle: Attach a hook to the level of the intended location (stack above your table). Make the wire drift from your cable outlet by passing it through this hook. For the Deco button: Leave "slack" on the wire, it should not be stretched.
Caution, if your suspension is wet, add a mounting piece to the hook. Opt for decorative, discreet or color hooks for the fun button to avoid a "DIY" rendering.

Second Solution: The Rail

Another solution is to give up the suspension for a track made of several spots. There are several of which the electrical output is eccentric at the end of the rail. This principle is tantamount to deriving the location of the wire outlet and the original power cable: It is hidden in the rail and positioned at the desired location (several rail connections are possible). For maximum discretion, we advise you to paint it or choose it in the same color as the ceiling.


However, if you do not want to give up the idea of your suspended luminaire, opt for a rail that connects one or more suspensions. Certainly, the rail will be visible on the ceiling, but it is an easy and cheap solution to solve its uncentred ceiling light problem. Also, it adds a few more spots, which is always useful.
Decoration Tips: Paint it in a pop tint to create a graphic effect on the ceiling.

Third Solution: The Bar

Attach a bar to the ceiling of the useful length near the wire outlet to the ceiling. Change the power cable of your suspension if it is too short to be able to wrap it around this bar.
Decoration tips: Drop the suspension in the center of the bar for an optimal aesthetic result.

Fourth Solution To Install Amzing Luminaire On Ceiling: The Ceiling Fallout

Make a roof drop like a little MDF or gypsum formwork (drywall) of the size and shape and a few inches thick to hide your wire fittings and junction box. This can give a very architectural look over a dining table, for example. This is the solution to which the designer Marie-Josée Cyr thought, especially as the ceilings were made of concrete, so impossible to embed the slightest connection.

This is the ideal solution for composing suspensions on the principle of accumulation. Let your creativity run free!
Note: There is a wide variety of spots to be planted. From the most classical, with the bright bulb, to the most original ones like figurines and animals.

Fifth Solution: A Particular Suspension

These are suspensions intended to be disoriented about the output of wires. They are equipped with a bent arm as a bow or articulated. The suspension part and the diffuser of the luminaire are thus deported from the pavilion and the suspension point. Originals and design, these luminaires are an ideal all-in-one solution. As a bonus, some of them allow to modulate the position of the diffuser by several centimeters, or even to turn to 180 degrees, to go up and down! The fixture moves by your desires and changes in furniture installation.

Our advice: For the first four solutions, remember that the electric wire has become an essential sewing element. Choose yarns of color, fabric or pattern. You will get a brightly finished staging.
Some light designers, have created suspensions specifically designed for the dicentric ceiling luminaires.

Comments

Popular posts from this blog

peak district mountain bike routes

11 Ideas to Make Beautiful Terraces That You Can Build in One Weekend

calories burned on exercise bike